L’imprimante 3D Anycubic Photon Mono X est une machine SLA au format et au prix réduits, lancée en même temps que la Photon Mono SE fin d’année 2020. Anycubic offre une surface d’impression de 8,9 pouces et une résolution de 4K, avec une connectivité Wifi pour envoyer les impressions depuis le réseau et surveiller les tâches à distance.
Le volume d’impression maximal de la Anycubic Photon Mono X est de 192 x 120 x 245 mm, soit un format plus avantageux que la plupart des autres imprimantes MSLA du marché. La hauteur de couche démarre à 10 microns et jusqu’à 150 microns au plus épais. Quant à elle, la vitesse d’impression peut atteindre 60 mm/h.
La connectivité réseau sans-fil Wifi permet de gérer les impressions à distance depuis l’application mobile Anycubic.
La Anycubic Photon Mono X sera idéalement complétée par le module Anycubic Wash & Cure pour le travail de post traitement des impressions 3D résine. Découvrez notre test du Wash & Cure Anycubic, ainsi que celui de la Photon Zero et Photon M3 pour se faire un idée du matériel Anycubic.
Do not buy the mono x they are unable to respect the parameters of the slicer.
I myself have a model which exposes between 5 and 7 seconds when it is told to expose 3s. support response: it’s a technical problem, we have to wait: D (since December they have been responding to each problem)
In addition, anti-alliasing does not work well under 3s per coat so forget about 1.5s coats.
Guess the support responses :
“Due to Photon Mono X is the latest product at our company,
if there are technical defects or other problems, our engineers will promptly report back to the R&D department to improve the technical problems of the printer in time.”
Or
“Since this is set by the firmware
Can only wait for the R&D department to issue a new firmware to solve the problem
There is no better way now”
An other ?
“Sorry for the inconvenience caused by the software problem
But I have fed your suggestions back to the R&D department
Let them update the new firmware as soon as possible
solve this problem”
Avoid machine, you buy a pre-alpha printer
Go to phrozen, elegoo They may shine less on their data sheet, but in real life they work much better
Plus the anti alliansing not work properly under 3s and I will let you guess their answer (hum hum : wait …)
And if you take more than 30 days to understand that machine is bullshit, too late to ask a retrun …
Hello how much price photon mono x
Hi
Early birds will start from 539$.
Salut,
il y a un pack avec la Wash&Cure machine, on sait si c’est la même qu’avant ou si la taille sera adaptée à la mono X ?
Bonjour,
Le Wash & Cure est le même pour toutes les imprimantes SLA Anycubic.
Oui c’est un produit unique
Je viens de passer commande de la photon mono x pour 520€ à peu près
Y’a plus qu’à attendre
Non pas adapté si tu imprimé gros
Do not buy the mono x they are unable to respect the parameters of the slicer.
I myself have a model which exposes between 5 and 7 seconds when it is told to expose 3s. support response: it’s a technical problem, we have to wait: D (since December they have been responding to each problem)
Proof :
https://drive.google.com/file/d/1tFwf33I35YGjRJJNGAu474E7TVetrUt6/view?usp=drivesdk
https://drive.google.com/file/d/1tU-BRIE1Agf4v3_QPszIYyfLHVMWAXnS/view?usp=drivesdk
https://drive.google.com/file/d/1uQEo_QdwxFESomK83eHVnJrUk9rnH9ge/view?usp=drivesdk
In addition, anti-alliasing does not work well under 3s per coat so forget about 1.5s coats.
Guess the support responses :
“Due to Photon Mono X is the latest product at our company,
if there are technical defects or other problems, our engineers will promptly report back to the R&D department to improve the technical problems of the printer in time.”
Or
“Since this is set by the firmware
Can only wait for the R&D department to issue a new firmware to solve the problem
There is no better way now”
An other ?
“Sorry for the inconvenience caused by the software problem
But I have fed your suggestions back to the R&D department
Let them update the new firmware as soon as possible
solve this problem”
Avoid machine, you buy a pre-alpha printer
Go to phrozen, elegoo They may shine less on their data sheet, but in real life they work much better
Plus the anti alliansing not work properly under 3s and I will let you guess their answer (hum hum : wait …)
And if you take more than 30 days to understand that machine is bullshit, too late to ask a retrun …